|
At Import Motors we believe that it is important for our customers to be aware of what is done on their vehicles when they bring them in for recommended maintenance. Below we have listed a general description of the work done on the different services for the newer models. Please be aware that depending on the year, model and mileage, details will vary. We highly recommend that you take a few minutes and study the information in your owners’ manual concerning regular maintenance on your car.
Check warning and interior lamps and horn
Inspect windshield, headlamp and rear window wiper/washer system
Check function of A/C – Heating system and all other accessories and switches
Inspect seat belts and locks for damage, twisting and proper function
Check SRS airbag units for torn cover, obvious damage or attachment of decals
Check sunroof for function and lubricate if necessary
Replace Dust Filter if equipped
Inspect headlamps and all exterior lamps
Clean antenna mast
Replace if necessary windshield wiper insert, adjust washer nozzle, and check condition of
headlamp and rear window wiper blade
Lubricate door hinges, hood, trunk/tailgate and locks
Check central locking/double lock
Check batteries for alarm remote controls in all vehicle master keys
Brake test, parking brake test
Check free play of wheel bearing and adjust if needed
Check brake pad/disc thickness, check condition of disc, inspect brake cables and brake hoses
Inspect tires fro correct pressure, damage, condition; record thread depth and retorque wheel bolts
Inspect condition, routing, leaks, of components, lines and hoses
Check and correct fluid level from rear-, front axle and manual transmission
Check condition of steering mechanical components
Check condition of front and rear suspension, especially condition of front axle ball joints
and lower control arm bushings
Inspect drive shaft flex discs
Inspect half-shaft boots
Check parking brake cable
Inspect exhaust system
Check Rear shock mountings on top
Change engine oil and filter
Replace spark plugs (As required by manufacturer)
Replace Intake Air Cleaner
Check valve clearances. Adjust as necessary
Check and correct fluid level from power steering, brake and level control system
Inspect, routing, leaks, of components, lines and hoses
Check cooling system for leak (pressurize) and antifreeze/corrosion protection and report
Check battery for correct fixation and electrolyte level and perform battery load test
Inspect condition and tension of all belts
Inspect and lubricate engine throttle linkage and modify if needed
Check A/C refrigerant charge and A/C performance
Lubricate catch, safety catch and hinges on engine hood
Replace Dust Filter (if access from engine compartment)
Check Fault Codes and Adaptation Factors and report on special DTC sheet and clear codes
Check O2 sensor operation
Reset service reminder
Check spare tire for correct pressure
(All items listed under Inspection I plus the following)
Replace fuel filter on model up to 1995, or as required by manufacturer
Replace main diesel filter
Replace spark plugs ( as required by manufacturer )
Replace intake air cleaner
Replace timing belt on engines M10, M20 & M21 (every 4 years or 60,000 miles)
Change oil in manual transmission on models up to 1998
Replace oil in rear axle on all models up to 1998
Change oil in automatic transmission on models up to 1995, without filter –
Except Lifetime Oil
|
