|
At Import Motors we believe that it is important for our customers to be aware of what is done on their vehicles when they bring them in for recommended maintenance. Below we have listed a general description of the work done on the different services for the newer models. Please be aware that depending on the year, model and mileage, details will vary. We highly recommend that you take a few minutes and study the information in your owners’ manual concerning regular maintenance on your car.
Check warning and interior lamps and horn
Inspect windshield, headlamp and rear window wiper/washer system
Check function of A/C – Heating system and all other accessories and switches
Inspect seat belts and locks for damage, twisting and proper function
Check SRS airbag units for torn cover, obvious damage or attachment of decals
Check sunroof for function and lubricate if necessary
Replace Dust Filter if equipped
Reset FSS Counter
Inspect headlamps and all exterior lamps
Clean antenna mast
Replace if necessary windshield wiper insert, adjust washer nozzle, and check condition of
headlamp and rear window wiper blade
Lubricate door hinges, hood, trunk/tailgate and locks
Check central locking/double lock
Check batteries for alarm remote controls in all vehicle master keys
Change engine oil and filter
Check and correct fluid level from power steering, brake and level control system
Inspect, routing, leaks, of components, lines and hoses
Check cooling system for leak (pressurize) and antifreeze/corrosion protection and report
Check battery for correct fixation and electrolyte level and perform battery load test
Inspect condition and tension of all belts
Inspect and lubricate engine throttle linkage and modify if needed
Check A/C refrigerant charge and A/C performance
Lubricate catch, safety catch and hinges on engine hood
Replace Dust Filter
Check spare tire for correct pressure
(All items listed under Service A plus the following)
Brake test, parking brake test
Check free play of wheel bearing and adjust if needed
Check brake pad/disc thickness, check condition of disc, inspect brake cables and brake hoses
Inspect tires for correct pressure, damage, condition; record thread depth and retorque wheel bolts
Inspect condition, routing, leaks, of components, lines and hoses
Check and correct fluid level from rear, front axle and manual transmission
Check condition of steering mechanical components
Check condition of front and rear suspension, especially condition of front axle
ball joints and lower control arm bushings
Inspect drive shaft flex discs
Inspect half-shaft boots
Check parking brake cable
Inspect exhaust system
Replace fuel filter
Replace air filter element
Replace activated charcoal filter
Replace spark plugs
|